Spyware.Systemsurv

Spyware.Systemsurv

Updated:
13 February 2007
Risk Impact:
High
Systems Affected:
Windows

Behavior


Spyware.Systemsurv is a program which monitors keystrokes, Web sites visited and IM conversations. Screenshots can also be captured, which can be triggered on specific keywords.

Symptoms


Your Symantec program detects Spyware.Systemsurv.

Behavior


This security risk must be manually downloaded and installed.

Antivirus Protection Dates

  • Initial Rapid Release version 02 October 2014 revision 022
  • Latest Rapid Release version 01 February 2015 revision 020
  • Initial Daily Certified version 09 February 2006
  • Latest Daily Certified version 05 March 2013 revision 018
  • Initial Weekly Certified release date 15 February 2006
Click here for a more detailed description of Rapid Release and Daily Certified virus definitions.

When Spyware.Systemsurv is executed, it performs the following actions:
  1. Creates the following files:

    • %UserProfile%\Start Menu\Programs\System Surveillance Pro\Help Manual.lnk
    • %UserProfile%\Start Menu\Programs\System Surveillance Pro\SSPro Data Viewer.lnk
    • %UserProfile%\Start Menu\Programs\System Surveillance Pro\Uninstall SSPro.lnk
    • %UserProfile%\Local Settings\Desktop\SystemSurveillancePro.htm
    • %Windir%\sspro.cnt
    • %Windir%\sspro.hlp
    • %Windir%\sysurbl.dll
    • %Windir%\sysural.dll
    • %Windir%\OrdPix.dll

      Note:
    • %UserProfile% is a variable that refers to the current user's profile folder. By default, this is C:\Documents and Settings\[CURRENT USER] (Windows NT/2000/XP).
    • %Windir% is a variable that refers to the Windows installation folder. By default, this is C:\Windows or C:\Winnt.

  2. Creates the following folders:

    • %UserProfile%\Start Menu\Programs\System Surveillance Pro
    • %Windir%\fontview

  3. Creates the following legitimate Microsoft files, and third party libraries:

    • C:\WINDOWS\system32\dllcache\dhtmled.ocx
    • C:\WINDOWS\system32\ciaResSvr20.dll
    • C:\WINDOWS\system32\ciaSCls20.dll
    • C:\WINDOWS\system32\ciaXPButton30.ocx
    • C:\WINDOWS\system32\ciaXPCombo30.ocx
    • C:\WINDOWS\system32\ciaXPDP30.ocx
    • C:\WINDOWS\system32\ciaXPFrame30.ocx
    • C:\WINDOWS\system32\ciaXPIML30.ocx
    • C:\WINDOWS\system32\ciaXPList30.ocx
    • C:\WINDOWS\system32\ciaXPListView30.ocx
    • C:\WINDOWS\system32\ciaXPRegSvr20.dll
    • C:\WINDOWS\system32\ciaXPScroll30.ocx
    • C:\WINDOWS\system32\ciaXPSelection30.ocx
    • C:\WINDOWS\system32\ciaXPSpin30.ocx
    • C:\WINDOWS\system32\ciaXPTab30.ocx
    • C:\WINDOWS\system32\ciaXPText30.ocx
    • C:\WINDOWS\system32\Codejock.CommandBars.9700.ocx
    • C:\WINDOWS\system32\cpvPicScroll.ocx
    • C:\WINDOWS\system32\duzactx.dll
    • C:\WINDOWS\system32\ijl15.dll
    • C:\WINDOWS\system32\MSComCt2.ocx
    • C:\WINDOWS\system32\MSVBVM60.DLL
    • C:\WINDOWS\system32\RichTx32.ocx
    • C:\WINDOWS\system32\vbar332.dll
    • C:\WINDOWS\system32\vbSendMail.dll
    • C:\WINDOWS\system32\VBSplitter.ocx
    • C:\WINDOWS\system32\vbwProgressBar.ocx
    • C:\WINDOWS\system32\wodSmtp.dll

  4. Creates the following registry subkeys:

    HKEY_CLASSES_ROOT%\CLSID\{47643398-A2F7-422B-9FCC-E5540B1EEB05}
    HKEY_CLASSES_ROOT%\CLSID\{9DF88E2D-BC3E-4524-B5D0-1C49557427A4}
    HKEY_CLASSES_ROOT%\CLSID\{B540C664-B279-4702-83B6-813C9552148F}
    HKEY_CLASSES_ROOT%\CLSID\{95E6C67A-F1E0-48EF-B0CD-3D72B23FB558}
    HKEY_CLASSES_ROOT%\TypeLib\{3B8554DF-2818-4D24-BF82-C7EE3F9AF3B5}
    HKEY_CLASSES_ROOT%\Interface\{2074D3F5-5D94-4468-B0D4-6388666AA3E3}
    HKEY_CLASSES_ROOT%\Interface\{DAC453D4-86AD-4DBE-8D44-2B88C376BBE3}
    HKEY_CLASSES_ROOT%\Interface\{DDA8B302-E846-4E1F-818D-0B701F969F9B}
    HKEY_CLASSES_ROOT%\Interface\{F127D096-0939-418E-B579-CE7E40EB6A8A}
    HKEY_CLASSES_ROOT%\SurvServices.DataBlockManipulation
    HKEY_CLASSES_ROOT%\SurvServices.DataInterface
    HKEY_CLASSES_ROOT%\SurvServices.Declarations
    HKEY_CLASSES_ROOT%\SurvServices.General
    HKEY_CLASSES_ROOT%\.zzr
    HKEY_CLASSES_ROOT%\SSPro
    HKEY_CLASSES_ROOT%\SSPro.Document
    HKEY_ALL_USERS%\Software\VB and VBA Program Settings\SSPro
    HKEY_ALL_USERS%\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs\System Surveillance Pro~

  5. Adds the value:

    "[VALUE]" = "%Windir%\svcwinra.exe"

    to the registry subkey:

    HKEY_LOCAL_MACHINE%\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

    so that the risk is executed every time Windows starts.

    Note: [VALUE] is chosen from one of the following:

    • Perm_Sys2
    • JmpRes
    • SysConn_Start
    • TMPINI34
    • Inet_Perf
    • Almondrv

  6. Creates many registry entries associated with the legitimate Microsoft files and third party libraries.



The following instructions pertain to all Symantec antivirus products that support security risk detection.
  1. Update the definitions.
  2. Run a full system scan.
  3. Delete any values added to the registry.
For specific details on each of these steps, read the following instructions.

1. To update the definitions
To obtain the most recent definitions, start your Symantec program and run LiveUpdate.


2. To run the scan
  1. Start your Symantec antivirus program, and then run a full system scan.
  2. If any files are detected, and depending on which software version you are using, you may see one or more of the following options:

    Note: This applies only to versions of Norton AntiVirus that support security risk detection. If you are running a version of Symantec AntiVirus Corporate Edition that supports security risk detection, and security risk detection has been enabled, you will only see a message box that gives the results of the scan. If you have questions in this situation, contact your network administrator.
    • Exclude (Not recommended): If you click this button, it will set the risk so that it is no longer detectable. That is, the antivirus program will keep the security risk on your computer and will no longer detect it to remove from your computer.

    • Ignore or Skip: This option tells the scanner to ignore the risk for this scan only. It will be detected again the next time that you run a scan.

    • Cancel: This option is new to Norton Antivirus 2005. It is used when Norton Antivirus 2005 has determined that it cannot delete a security risk. This Cancel option tells the scanner to ignore the risk for this scan only, and thus, the risk will be detected again the next time that you run a scan.

      To actually delete the security risk:
      • Click its file name (under the Filename column).
      • In the Item Information box that displays, write down the full path and file name.
      • Then use Windows Explorer to locate and delete the file.

    • Delete: This option will attempt to delete the detected files. In some cases, the scanner will not be able to do this.
      • If you see a message, "Delete Failed" (or similar message), manually delete the file.
      • Click the file name of the risk that is under the Filename column.
      • In the Item Information box that displays, write down the full path and file name.
      • Then use Windows Explorer to locate and delete the file.

Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode . Once you have restarted in Safe mode, run the scan again.

After the files are deleted, restart the computer in Normal mode and proceed with the next section.

Warning messages may be displayed when the computer is restarted, since the risk may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:

Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

3. To delete the value from the registry
Important: Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. Read the document: How to make a backup of the Windows registry .
  1. Click Start > Run.
  2. Type regedit

    Then click OK.

    Note: If the registry editor fails to open the risk may have modified the registry to prevent access to the registry editor. Security Response has developed a tool to resolve this problem. Download and run this tool, and then continue with the removal.

  3. Navigate to the subkey:

    HKEY_LOCAL_MACHINE%\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  4. In the right pane, delete the value:

    "[VALUE]" = "%Windir%\svcwinra.exe"

  5. Navigate to and delete the following subkeys:

    HKEY_CLASSES_ROOT%\CLSID\{47643398-A2F7-422B-9FCC-E5540B1EEB05}
    HKEY_CLASSES_ROOT%\CLSID\{9DF88E2D-BC3E-4524-B5D0-1C49557427A4}
    HKEY_CLASSES_ROOT%\CLSID\{B540C664-B279-4702-83B6-813C9552148F}
    HKEY_CLASSES_ROOT%\CLSID\{95E6C67A-F1E0-48EF-B0CD-3D72B23FB558}
    HKEY_CLASSES_ROOT%\TypeLib\{3B8554DF-2818-4D24-BF82-C7EE3F9AF3B5}
    HKEY_CLASSES_ROOT%\Interface\{2074D3F5-5D94-4468-B0D4-6388666AA3E3}
    HKEY_CLASSES_ROOT%\Interface\{DAC453D4-86AD-4DBE-8D44-2B88C376BBE3}
    HKEY_CLASSES_ROOT%\Interface\{DDA8B302-E846-4E1F-818D-0B701F969F9B}
    HKEY_CLASSES_ROOT%\Interface\{F127D096-0939-418E-B579-CE7E40EB6A8A}
    HKEY_CLASSES_ROOT%\SurvServices.DataBlockManipulation
    HKEY_CLASSES_ROOT%\SurvServices.DataInterface
    HKEY_CLASSES_ROOT%\SurvServices.Declarations
    HKEY_CLASSES_ROOT%\SurvServices.General
    HKEY_CLASSES_ROOT%\.zzr
    HKEY_CLASSES_ROOT%\SSPro
    HKEY_CLASSES_ROOT%\SSPro.Document
    HKEY_ALL_USERS%\Software\VB and VBA Program Settings\SSPro
    HKEY_ALL_USERS%\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs\System Surveillance

  6. Exit the Registry Editor.